4 foot tall dual leaf driveway gate with space for the gates to swing back and forth with hardware. Includes 2 1/2" support posts/frame with 1 5/8 bracing. Consists of two independent panels that can swing either way, coming together in the middle to latch to each other. One of the panels secures to the ground with a an included drop rod.
These gates are a nice design because you can open part of the gate for person access or the entire large opening for vehicle or machine access.
The width selected is the total opening size. For example, if you select 12 feet wide you will receive two six foot wide panels that give you a 12 foot wide gate.
Note on gate width: the width selection is the approximate width of the gate including support posts, hardware and space. Please use this width as a guide rather than a rule. If you are working with a specific space please order the next gate width up and cut down the three vertical pieces to fit your space.
Use the fencing from your fence kit to cover this access gate - no mesh is shipped with the gate. There are 50+ different types of fencing and these gates are universal (they work with all types of fencing - fence mesh).
Ground sleeves can also be added as an option instead of or in addition to concrete. Sleeves have a locking set screw to make these gates permanent or removable. Large ground sleeves are 30" long and require one large driving anvil (different from standard driving anvil used with smaller post sleeves that come with fence kits). One large anvil will work with a infinite number of large sleeves.
Note: large driving anvils work with both large and small sleeves (as used in side braces).